 :

6.10.3     .
              ,       (sd6notifyProxy)  .
             64- .

  :
  install.cmd    -  
  LMXDLL4915.dll -   
  readme.txt     -  

 :

-    Visual C++  Visual Studio 2019
   https://aka.ms/vs/16/release/vc_redist.x86.exe

-      .

-   install.cmd   .

-    ,     : "ScrewDriver license emulator is successfully installed. Please reboot."

-  


 :

1.  ScrewDrivers


    (sd6notifyProxy):

-         UninstallProxy.reg    sd6notifyProxy.dll   "C:\Program Files\Tricerat\Simplify Printing\ScrewDrivers Server v6".
  :      .   
==================================================================
  v6.10
 
    :
         
           ,      :
         *  UninstallProxy.reg
         *  
         *     sd6notifyProxy.dll
         
           ScrewDrivers (6.10.2.17692  ).
         
           (.  ).

     Control Panel   ,  Licensing Model  Using a Tricreat Licesne Server     ,  127.0.0.2  : 123  
          ()
       - . (      ScrewDrivers)
        : 6.10.2 - 6.10.3
===================================================================== 
Change History:

6.10.3 The first version of the second generation emulator.
       In this version, the principle of the emulator has changed significantly, so for stable operation the old emulator (sd6notifyProxy) must be removed.
       The new version of the emulator is available only in the 64-bit version.

Files in the archive:
  install.cmd - Emulator installer
  LMXDLL4915.dll - Protection Emulator Engine
  readme.txt - This file

Emulator Installation:

- Install the Visual C ++ Redistributable Package for Visual Studio 2019
   https://aka.ms/vs/16/release/vc_redist.x86.exe

- Unzip the contents of the archive to a local drive.

- Run the install.cmd file with Administrator rights.

- In case of successful installation, the following message will appear on the screen: "ScrewDriver license emulator is successfully installed. Please reboot."

- Reboot PC


Removing an emulator:

1. Reinstall ScrewDrivers


Removing the old emulator version (sd6notifyProxy):

- To remove the old version of the emulator, run the UninstallProxy.reg file and delete the sd6notifyProxy.dll file from the folder "C: \ Program Files \ Tricerat \ Simplify Printing \ ScrewDrivers Server v6".
  CAUTION: If a deletion error occurs, restart the computer.  


=================================================== =================
License Emulator v6.10
 
    Installation:
         
        If the old emulator is installed, remove it using the following sequence:
         * Run UninstallProxy.reg
         * We reboot the computer
         * Delete the file of the old sd6notifyProxy.dll emulator
         
        Install the new version of ScrewDrivers (6.10.2.17692 or higher).
         
        Install a new emulator (see instructions above).

    In the Control Panel or during installation, in the Licensing Model, select Using a Tricreat Licesne Server and enter any address, for example 127.0.0.2 or so: 123
    We carefully read the instructions for installing the emulator (above)
    This version of the emulator is universal. (Must be compatible with newer ScrewDrivers versions)
    Compatibility confirmed with the following versions: 6.10.2 - 6.10.3
=================================================== =====================